home *** CD-ROM | disk | FTP | other *** search
/ Freaks Macintosh Archive / Freaks Macintosh Archive.bin / Freaks Macintosh Archives / Macintosh / Tex_Edit_Plus-2.3.3.sit / TE+ 2.3.3 / Tex-Edit Plus.rsrc / STR#_1101.txt < prev    next >
Text File  |  1998-08-04  |  4KB  |  109 lines

  1. Converts all curly quotes to straight quotes, for use by non-Mac systems.
  2.  
  3. Converts all straight quotes to curly (typographic) quotes.
  4.  
  5. Adds a carriage return to the end of each line.  Line length is specified in the Modify dialog.  Useful for converting Mac to BBS format.
  6.  
  7. Adds a carriage return and a linefeed to the end of each line.  Line length is specified in the Modify dialog.  Useful for converting Mac to DOS format.
  8.  
  9. Removes carriage returns throughout the document, leaving paragraph formatting intact.  Useful for converting BBS to Mac format.
  10.  
  11. Removes carriage return/linefeed pairs throughout the document.  Useful for converting DOS to Mac format.
  12.  
  13. Enter the desired distance (in pixels) between tab stops here.
  14.  
  15. Enter the desired speech pitch modulation (0-100) here.
  16.  
  17. Enter the desired speech rate (1-400 words per minute) here.
  18.  
  19. Enter the desired baseline speaking pitch (0-100) here.
  20.  
  21. Choose another voice by clicking on this popup menu.
  22.  
  23. To hear a sample of the specified voice parameters, click here.
  24.  
  25. Searches all open documents.  Unavailable because only one document is open or there is no active search session.
  26.  
  27. Searches for the desired text in all subsequent open documents.
  28.  
  29. Your document will be saved in this format.  To use a different file format, make another selection from this popup menu.
  30.  
  31. This is the default Tex-Edit file format.  To use an alternate format, make another selection from this popup menu.
  32.  
  33. To avoid printing page numbers, click here.
  34.  
  35. Checked because the selected text is already this size.
  36.  
  37. Changes the selected text to this point size.
  38.  
  39. Checked because the document is already fully justified.
  40.  
  41. Size Menu
  42.  
  43. This menu allows you to set the size for the selected text.
  44.  
  45. Fully justifies all text in the active document.
  46.  
  47. Checked because the document is already right-justified.
  48.  
  49. Right-justifies all text in the active document.
  50.  
  51. Checked because the document is already center-justified.
  52.  
  53. Center-justifies all text in the active document.
  54.  
  55. Checked because the document is already left-justified.
  56.  
  57. Left-justifies all text in the active document.
  58.  
  59. Sentences will be highlighted as they are spoken.
  60.  
  61. Highlights individual sentences as they are spoken.
  62.  
  63. Words will be highlighted as they are spoken.
  64.  
  65. Highlights individual words as they are spoken.
  66.  
  67. Highlighting is off.
  68.  
  69. To turn off highlighting, select this.
  70.  
  71. Checked because the text is already justified in your system's usual manner.
  72.  
  73. Font Menu
  74.  
  75. This menu allows you to set the font for the selected text.
  76.  
  77. Checked because this is the font of the current selection.
  78.  
  79. Sets text justification to your system's standard preference.
  80.  
  81. Changes the selected text to this font face.
  82.  
  83. Closes all windows, quits Tex-Edit and returns to the Finder.
  84.  
  85. Displays a dialog box allowing you to customize some of Tex-Edit's default attributes.
  86.  
  87. Prints the active document.  Unavailable because no documents are open.
  88.  
  89. Prints the active document.  Hold down the option key to print the selected text.
  90.  
  91. Choose a default unit of measurement.  This choice will be used in the Page Setup (Print Margins) dialog.
  92.  
  93. Displays the printer's standard page setup dialog for adjusting paper size, orientation and other printing parameters.
  94.  
  95. Reverts the active document to its last saved version.  Unavailable because no changes have been made since the last "Save" or no editable documents are open.
  96.  
  97. Reverts the active document to its last saved version.
  98.  
  99. Displays a dialog which allows you to save the active document.  Unavailable because no documents are open.
  100.  
  101. Displays a dialog box which allows you to re-name and save the active document to disk.
  102.  
  103. Saves the active document to disk.  Unavailable because no changes have been made since the last "Save" or no saveable documents are open.
  104.  
  105. Saves the active document to disk.  Hold down the Option key to save all windows.
  106.  
  107. Closes the active document.  Unavailable because no documents are open.
  108.  
  109.